RM CLUBSPORT
Ridgeline Motorsport E9X M3 5-Piece GTS Front Splitter
Ridgeline Motorsport E9X M3 5-Piece GTS Front Splitter
SKU:WRMDLIPGLSE9XM3004UP
- 1 Set Upper Front Splitter Components
- No Mounting Hardware Included
- 1X Adjustable Lower Front Splitter
- No Mounting Hardware Included
- 2X Stainless Steel Front Mounting Brackets
- 1X Aluminum Center Support Bar
- 1 Set Double-Sided Mounting Tape
- 1 Set Complete Installation Hardware
- 1 Set Upper Front Splitter Components
- 1X Adjustable Lower Front Splitter
- 2X Stainless Steel Front Mounting Brackets
- 1X Aluminum Center Support Bar
- 1 Set Double-Sided Mounting Tape
- 1 Set Complete Installation Hardware
- 1 Set Upper Front Splitter Components
- No Mounting Hardware Included
- 1X Adjustable Lower Front Splitter
- No Mounting Hardware Included
- 2X Stainless Steel Front Mounting Brackets
- 1X Aluminum Center Support Bar
- 1 Set Double-Sided Mounting Tape
- 1 Set Complete Installation Hardware
- 1 Set Upper Front Splitter Components
- 1X Adjustable Lower Front Splitter
- 2X Stainless Steel Front Mounting Brackets
- 1X Aluminum Center Support Bar
- 1 Set Double-Sided Mounting Tape
- 1 Set Complete Installation Hardware
- 1 Set Upper Front Splitter Components
- No Mounting Hardware Included
- 1X Adjustable Lower Front Splitter
- No Mounting Hardware Included
- 2X Stainless Steel Front Mounting Brackets
- 1X Aluminum Center Support Bar
- 1 Set Double-Sided Mounting Tape
- 1 Set Complete Installation Hardware
- 1 Set Upper Front Splitter Components
- 1X Adjustable Lower Front Splitter
- 2X Stainless Steel Front Mounting Brackets
- 1X Aluminum Center Support Bar
- 1 Set Double-Sided Mounting Tape
- 1 Set Complete Installation Hardware
Couldn't load pickup availability
WARRANTY POLICY
WARRANTY POLICY
Warranty & Inspection Policy
All products must be carefully inspected within seven (7) calendar days of delivery.
Any claim involving damage, defects, missing parts, or incorrect items must be submitted within this seven-day inspection period. Claims made more than seven days after delivery will not be eligible for warranty coverage, replacement, return, or refund.
Customers are responsible for inspecting the product and confirming that it is correct, complete, undamaged, and suitable for the intended vehicle before installation.
Products must not be installed if any damage, defect, fitment issue, or missing component is discovered. Please contact us before proceeding with installation.
Once a product has been installed on a vehicle, it is considered accepted by the customer and is no longer eligible for warranty coverage, return, replacement, or refund.
By purchasing and installing our products, the customer acknowledges and agrees to this Warranty & Inspection Policy.
Quick Answer
The Ridgeline Motorsport E9X M3 Adjustable 5-Piece GTS Front Splitter is designed for the BMW E90, E92 and E93 M3. Inspired by the BMW E92 M3 GTS, it combines an inset upper splitter with an adjustable lower splitter and is available in 2x2 carbon fiber or satin black fiberglass. Professional installation and permanent bumper modification are required.
5-Piece GTS Configuration
The upper splitter sits slightly inside the outer edge of the front bumper, following the distinctive positioning of the original BMW E92 M3 GTS rather than sitting flush with the bumper edge.
The lower splitter extension is set during installation. Two stainless steel front brackets and one aluminum center support bar connect the assembly to the vehicle’s front structure for a more rigid installation than a conventional bumper-mounted E92 M3 front lip.
Product Features
- Adjustable 5-piece GTS-inspired design
- Inset upper splitter position
- Separate adjustable lower front splitter
- Three-point chassis-supported installation
- Two stainless steel front brackets
- One aluminum center support bar
- Carbon fiber and fiberglass material options
- Mounting tape and installation hardware included with the Full Kit
- Professional installation required
Material & Finish Options
- 2x2 Carbon Fiber: Available in gloss or made-to-order matte finish.
- Satin Black Fiberglass: A more understated finish that may show handling marks more readily than a gloss-painted or clear-coated surface.
Vehicle Fitment
Designed for:
- BMW E90 M3 Sedan
- BMW E92 M3 Coupe
- BMW E93 M3 Convertible
Confirm the factory front bumper configuration and the condition of the bumper brackets and mounting points before ordering.
Installation Requirements
Professional installation is required. Installation involves front bumper removal, alignment, drilling and cutting portions of the bumper to create clearance for the chassis-mounted brackets.
Inspect the factory front bumper brackets before installation. For the best alignment, Ridgeline Motorsport recommends replacing damaged, worn or misaligned brackets with new OEM BMW components:
- Left: 51118042081
- Right: 51118042082
Review the Ridgeline Motorsport Installation Guides and watch the E9X M3 GTS Front Splitter Installation Video before installation.
Disclaimer View fitment, installation and finish information
Fitment Disclaimer
The included mounting brackets were developed using brand-new OEM BMW front bumper brackets to achieve accurate alignment and fitment.
The condition of the factory bumper brackets may vary between vehicles due to previous impacts, repairs, bending, corrosion or general wear. Damaged or misaligned brackets may prevent the splitter components from aligning correctly.
For the best installation result, Ridgeline Motorsport recommends replacing damaged, worn or misaligned factory bumper brackets with new OEM BMW components:
- Left: 51118042081
- Right: 51118042082
Ridgeline Motorsport does not provide refunds, replacements or warranty coverage for fitment issues caused by damaged, bent, modified, misaligned or previously repaired brackets, bumpers, mounting points or structural components.
Upper Splitter Position
The upper splitter is designed to sit slightly inside the outer edge of the front bumper, following the positioning of the original BMW E92 M3 GTS upper splitter.
It is not designed to sit flush with the outer edge of the bumper. Pulling the upper splitter outward to the bumper edge may result in incorrect alignment and fitment.
Review reference images of the original BMW E92 M3 GTS and the Ridgeline Motorsport installation guide before positioning the upper splitter.
Adjustment Notice
The lower splitter extension can be adjusted during or after installation to change how far it projects from the upper splitter. Adjustment requires loosening and retightening the applicable mounting hardware and is not intended to be performed quickly during normal driving.
Confirm that all mounting hardware is properly tightened before operating the vehicle.
Bumper Modification Requirement
Professional installation is required. Installation involves front bumper removal, alignment, drilling and cutting portions of the bumper to create clearance for the chassis-mounted brackets.
By purchasing this product, the customer acknowledges that permanent bumper modification is required. Returns, refunds, replacements and warranty claims will not be accepted because the customer or installer is unwilling to complete the required installation procedure.
Chassis-Mounted Product Disclaimer
Chassis-mounted aerodynamic components are rigidly secured to the vehicle. A sufficiently strong impact may transfer force into the splitter, mounting brackets, bumper, reinforcement components, chassis or surrounding vehicle structure and may cause additional damage.
By purchasing and installing this product, the customer acknowledges and accepts the risks associated with chassis-mounted aerodynamic components.
Ridgeline Motorsport is not responsible for damage to the vehicle, splitter, brackets, hardware or surrounding components resulting from impacts, road hazards, improper installation, accidents, misuse or track use.
Installation and use of this product are subject to Ridgeline Motorsport’s Terms and Conditions.
Satin Black Finish Notice
The satin black fiberglass finish may show scratches, scuffs and handling marks more readily than a gloss-painted or clear-coated surface.
Every component is inspected before shipment. However, minor surface marks may occur during packaging, transportation, handling or installation. Returns, refunds and replacements will not be provided for minor cosmetic scratches or handling marks on satin-finished components.
Please review and accept the characteristics of the satin black finish before placing your order.