Paragon Performance
Paragon PPS814 Titanium Brake Pad Shims
Paragon PPS814 Titanium Brake Pad Shims
Couldn't load pickup availability
WARRANTY POLICY
WARRANTY POLICY
Warranty & Inspection Policy
All products must be carefully inspected within seven (7) calendar days of delivery.
Any claim involving damage, defects, missing parts, or incorrect items must be submitted within this seven-day inspection period. Claims made more than seven days after delivery will not be eligible for warranty coverage, replacement, return, or refund.
Customers are responsible for inspecting the product and confirming that it is correct, complete, undamaged, and suitable for the intended vehicle before installation.
Products must not be installed if any damage, defect, fitment issue, or missing component is discovered. Please contact us before proceeding with installation.
Once a product has been installed on a vehicle, it is considered accepted by the customer and is no longer eligible for warranty coverage, return, replacement, or refund.
By purchasing and installing our products, the customer acknowledges and agrees to this Warranty & Inspection Policy.
Paragon PPS814 titanium brake pad shims fit Paragon PA055 / PA025 calipers using the caliper-specific brake application listed below. They sit between the pad backing plate and caliper pistons to limit heat transfer into the caliper and brake fluid.
Shim specification and fitment
| Manufacturer / product family | Paragon Performance / PPS814 |
|---|---|
| Application | Paragon PA055 / PA025 calipers |
| Axle | Caliper-specific |
| Required brake system | Aftermarket Paragon PA055 or PA025 calipers; not determined by vehicle model alone |
| Material | Grade 5 titanium — 6AL-4V / ASTM B348 |
| Thickness | 0.5mm (0.02 inch) |
| Quantity | Four shims — one axle set |
How titanium shims help
Titanium’s low thermal conductivity makes the shim a thermal barrier between a hot brake pad and the caliper piston. This supports heat management during repeated braking, alongside suitable pads, rotors and fresh brake fluid. It does not change pad compound or replace the need for adequate cooling.
Before installation
Aftermarket Paragon PA055 or PA025 calipers; not determined by vehicle model alone. Confirm the backing-plate outline and piston-contact area. Account for the additional 0.5mm thickness per shim, and check pad movement and available clearance during installation. These shims are not a universal fit based on vehicle model alone.
Inspect brake-fluid condition and the complete braking system before track use. Have the work completed by a qualified installer.
Product FAQs
What is included with PPS814?
A set of four 0.5mm Grade 5 titanium shims for one axle.
Will these shims fit my calipers?
Aftermarket Paragon PA055 or PA025 calipers; not determined by vehicle model alone. Match the shim outline to the pad backing plate and confirm installation clearance.
Do titanium shims prevent all brake fade?
No. They limit heat transfer at the pad-to-piston interface. Pad temperature range, rotor cooling and brake-fluid condition still matter.